25-EP, 55-SHPEP, 55-TRPEP

Cartridge Heater Assembly - Igniter, and Collar | Part Number: PU-CHA

$83.31

Cartridge Heater (igniter) element for Auto-Start pellet units (Auto-Start units have manufacture date of 2004 or later). Comes with locking...

Combustion Blower and Motor Gaskets | Part Number: PU-CBMG

$27.35

England's Stove Works genuine replacement gasket for our Exhaust (Combustion) Blower. Contains the following two items: 1. Combustion Blower Gasket....

Vacuum Hose for Pellet Stove Vacuum Switch | Part Number: PU-VH

$25.78

Vacuum Hose Kit for vacuum shut-down switch. Contains one (1) five-foot length of hose that can be cut to fit...

Vacuum Shut Down Switch .04-.05 | Part Number: CU-VS

$68.53

Vacuum Shut Down Switch. This is the "Door Ajar Switch." The vacuum hose from this switch connects directly to the...

Hopper Lid Gasket | Part Number: PU-HLG

$33.38

Hopper Lid Gasket for pellet stove hopper lids. Includes self-adhesive backing for easy strip and press application.NOTE: Please enter your...

Hopper Lid Safety Switch Button Type | Part Number: AC-HLSB

$31.19

Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS.(NOTE: Also for pellet grill/smokers with PG100 in model number) Important!...

Heat Sensor For Control Board | Part Number: PU-CBHS

$31.24

Heat Sensor for Control Board (the white-cloth covered wire shown in photo). For control boards used on pellet stoves manufactured...

Burn Pot for EP | Part Number: PU-BPEP

$89.70

Burn Pot unit for models with EP or CBEP in model number. This is a one-piece unit, and is the...

Fuse, 6 amp, for Control Board (set of 5) | Part Number: PU-CBF6

$19.28

Fuse for Control Board. Box of 5.NOTE: Even If you have a stove that was supplied with a 5 amp,...

Ceramic Fiber Board for EP Stove | Part Number: AC-CFBEP

$84.48

Ceramic Fiber Board for "Evolution Pellet" Stove models listed on this page.

Door Gasket Kit for EP | Part Number: AC-DGKEP

$35.99

Door Gasket Kit for pellet models with "EP" in model number. 3/4" round door gasket, includes silicone necessary to install....

Digital Control Board for EP (2008) | Part Number: PU-CBEP

$257.21

Digital System Control Board (rear of board is pictured). For EP or EPI ("Evolution Pellet") models listed on this page....

Outside Air Kit for Pellet Units | Part Number: PU-OAK

$85.05

This kit is manufactured by England's Stove Works, and is the official OEM outside air kit for our pellet stoves....

Black Spray Paint, ORM-D | Part Number: AC-MBSP

$32.85

High-temperature black spray paint. 12 oz. can. NOTE: By law, this item can only be shipped UPS Ground (even if...

Hopper Lid Safety Switch Arm Lever | Part Number: AC-HLSA

$31.19

Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS. Important! You must replace with the type of switch that...

Flexible Aluminum Intake Air Hose 2" | Part Number: PU-FAH

$36.10

Ash Pan Gasket | Part Number: AC-APG

$28.51

Gasket kit for the ash pan of the stove. Includes gasket (3/4" wide, adhesive on one side).In the Comments box,...

Black Silicone, 3 oz. Tube | Part Number: AC-RTV3

$24.50

3 oz. tube black silicone. Tested to 425 degrees F.See below for video instructions regarding this part on various models....

Recessed Hopper Lid Latch ( 2002 Models or Later) | Part Number: PU-62-40-151-3

$41.00

Recessed Hopper Lid Latch. One per package.NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Order...

Center Glass, 10.5" x 14.25" 5mm Glass | Part Number: AC-G40

$127.61

Door Glass. Includes 10.675" x 14.438" glass, and gasket necessary to install. Shown on 25-EP as center glass, works on models...

DuraVent PelletVent 3" Pellet Vent Adapter | Part Number: PU-3079

$33.29

3" Pellet Pipe Adapter. Adapts into appliance outlet, allowing pipe to easily connect or disconnect. Can be used for horizontal...

Cartridge Heater (Igniter) Sleeve for EP Models | Part Number: AC-CHSEP

$52.98

Cartridge Heater (Igniter) Sleeve for EP Models (25-EP, 25-EPI, 55-SHPEP, 55-SHPEPI, 55-TRPEP, 55-TRPEPI)

Auger for 25-EP/EPI/CBEP/PUF/PAH/IP - 7" OAL | Part Number: PU-AFEP

$53.10

Steel auger for some pellet stove models. Approx. 7 inches long. Auger only, no other parts included.

1/4" wide X 3"OD x 1" ID Rubber Gasket for Pellet Stove Auger Motor | Part Number: CU-RG

$16.50

1/4" wide X 3" Gasket (functions as a Vibration Dampener). Fits between the Auger Motor and the Auger Mounting Plate...

DuraVent PelletVent Clean-Out Tee for 3" Pellet | Part Number: AC-3067

$92.14

Tee with Cleanout Adapter. 3" diameter pellet pipe. Convenient twist-lock connection. Creates 90 degree offset with clean-out access; easy access...

Cleaning Tool for all Pellet Stoves | Part Number: AC-CT

$28.31

A great, handy cleaning tool for all pellet stoves of any make and model. Tip end is perfect for cleaning...

DuraVent PelletVent 3' Section of 3" Pellet Pipe | Part Number: AC-3036

$64.23

Three-foot (3') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...

DuraVent PelletVent 90 Degree Elbow for 3" Pellet | Part Number: AC-3090

$73.48

For 3" pellet vent pipe. 90 degree elbow is ideal for when you need an extra elbow in your installation....

DuraVent PelletVent 45 Degree Elbow for 3" Pellet Pipe | Part Number: AC-3045

$62.49

For 3" pellet vent pipe. 45 degree elbow is ideal for corner installations (to connect cater-cornered stove to a through-the-wall...

DuraVent PelletVent 1' Section of 3" Pellet Pipe | Part Number: AC-3012

$43.74

One-foot (1') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...

Auger Coupler for Pellet Stove | Part Number: CA-AC

$28.51

Auger Coupler for pellet (and corn/multi-fuel) stove models. This is for the coupler only (arrow in image points to it),...

Exhaust Tube Gasket for 25-PDVC; 2"x13"x14" | Part Number: PU-EDIC

$26.91

Exhaust Tube Gasket for the American Standard Stove (25-PDVC, 55-SHP10 55-SHP10L, American Standard or 55-TRP10)

DuraVent PelletVent 1' Adjustable Section of 3" Pellet Pipe | Part Number: AC-3012A

$51.98

One-foot (1') long section of 3" pellet vent pipe. How it works: Use when a fixed length of pellet vent...

DuraVent PelletVent Wall Strap for 3" Pellet Vent Kit | Part Number: AC-3069

$32.89

Dura-Vent Wall Strap for 3" Pellet Vent KitNOTE: Unfortunately, product is not available for Canada.

DuraVent PelletVent Wall Thimble for 3" Pellet Pipe | Part Number: AC-3043

$68.02

Dura-Vent Wall Thimble for 3" Pellet PipeNOTE: Unfortunately, product is not available for Canada.