25-PAF, 55-SHP25, 55-TRP25

Fuse, 6 amp, for Control Board (set of 5) | Part Number: PU-CBF6

$19.28

Fuse for Pellet Stove Control Board. Box of 5. Works with models that have the side mount control board, as...

Blower Motor for Furnace | Part Number: BM-1376

Sold Out $359.99

OEM part for your England's Stove Works stove. Replaces the original blower motor that came with the stove. Blower Motor...

Bottom Auger for Pellet Stoves | Part Number: PU-AF11B

$74.00

Bottom Auger for Pellet Stoves with two-auger feed system. NOTE on older models: Not for models 1992-2000, that are not...

Top Auger for Pellet Units | Part Number: PU-AF6T

$73.39

Top Auger. For pellet units that have a two-auger feed system. NOTE: Does not include Locking Collar (PU-2X570) or Block...

Burn Pot (Firepot) for Pellet Stoves | Part Number: PU-BP02

$119.99

Burn Pot (firepot) Assembly. See images and video. This is a welded assembly. For 25-PDVC, 25-PDVCH, 55-SHP10, 55-SHP10L, 55-TRP10 and...

3/4" I.D. Auger Locking Collar | Part Number: PU-2X570

$25.29

England's Stove Works genuine OEM replacement parts. 3/4" (I.D.) Auger Shaft Locking Collar for pellet stoves. This is the collar...

Outside Air Kit for Pellet Units | Part Number: PU-OAK

$89.99

This kit is the official OEM outside air kit for our pellet stoves. Provides outside fresh air that is mandatory...

DuraVent PelletVent 3" Pellet Vent Kit | Part Number: AC-3000

$326.00

Through-the-wall 3" Pellet Vent Kit (mfg. by Dura-Vent). Contains all the parts needed for most pellet through-the-wall installations. NOTE: Unfortunately,...

Flexible Aluminum Intake Air Hose 2" | Part Number: PU-FAH

$36.36

Black Silicone, 3 oz. Tube | Part Number: AC-RTV3

$28.97

3 oz. tube black silicone. Tested to 425 degrees F.See below for video instructions regarding this part on various models....

Hopper Lid Safety Switch Arm Lever | Part Number: AC-HLSA

Sold Out $32.93

Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS in the original owner's manuals. This switch helps ensure that fuel...

3/8 x 1 3/4 Hinge Pin Rivet for Cast Doors | Part Number: AC-HP

$24.95

Hinge Pin Rivet for cast stove door; pin measures 3/8" x 1 3/4". See images. Price shown is for one...

Hopper Lid Latch; Raised; Corn and Pre-2002 Pellet | Part Number: PU-103-50

$35.49

Hopper Lid Latch. One per package. If you need two, enter 2 into the Shopping Cart before checkout. NOTE: As...

DuraVent PelletVent 3" Pellet Vent Adapter | Part Number: PU-3079

$59.73

3" Pellet Pipe Adapter. Adapts into appliance outlet, allowing pipe to easily connect or disconnect. Can be used for horizontal...

Cleaning Tool for all Pellet Stoves | Part Number: AC-CT

$52.40

A great, handy cleaning tool for all pellet stoves of any make and model. Tip end is perfect for cleaning...

DuraVent PelletVent Clean-Out Tee for 3" Pellet | Part Number: AC-3067

$117.93

Tee with Cleanout Adapter. 3" diameter pellet pipe. Convenient twist-lock connection. Creates 90 degree offset with clean-out access; easy access...

Wear Plate BP PDV-P-I/SHP15-20-22 for 1993-2000 units | Part Number: PU-BP96WP

$49.99

Wear Plate fits all pellet stoves model 25-PDV, PDVP, PFS , PFSP and TRISTAR 25-5670 manufactured from 1993 to 2000....

DuraVent PelletVent 3' Section of 3" Pellet Pipe | Part Number: AC-3036

$83.92

Three-foot (3') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...

DuraVent PelletVent 45 Degree Elbow for 3" Pellet Pipe | Part Number: AC-3045

$80.93

For 3" pellet vent pipe. 45 degree elbow is ideal for corner installations (to connect cater-cornered stove to a through-the-wall...

DuraVent PelletVent 1' Section of 3" Pellet Pipe | Part Number: AC-3012

$67.00

One-foot (1') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...

DuraVent PelletVent 90 Degree Elbow for 3" Pellet | Part Number: AC-3090

$87.08

For 3" pellet vent pipe. 90 degree elbow is ideal for when you need an extra elbow in your installation....