25-PDV, 55-SHP22, 55-TRP22

Auger Motor (1 RPM) | Part Number: PU-047040

$163.65

1 R.P.M. Auger Motor for Pellet Units. England's Stove Works genuine 1 RPM replacement auger for our stoves. NOTE: Also...

Cartridge Heater Assembly - Igniter, and Collar | Part Number: PU-CHA

$83.31

Cartridge Heater (igniter) element for Auto-Start pellet units (Auto-Start units have manufacture date of 2004 or later). Comes with locking...

Combustion Blower and Motor Gaskets | Part Number: PU-CBMG

$27.35

England's Stove Works genuine replacement gasket for our Exhaust (Combustion) Blower. Contains the following two items:1. Combustion Blower Gasket. Fits...

Burn Pot FLange Gasket | Part Number: PU-BPG

$22.66

Burn Pot Flange Gasket. Fits between the burn pot and the rear of the stove. NOTE: Please enter your stove's...

Vacuum Hose for Vacuum Switch | Part Number: PU-VH

$25.78

Vacuum Hose Kit for vacuum shut-down switch. Contains one (1) five-foot length of hose that can be cut to fit...

Convection Blower for PDVC/SHP10/TRP10 | Part Number: PU-4C442

$163.65

IMPORTANT: For all pellet models listed on this page except 2002 and newer "Deluxe" freestanding and insert pellet models ("Deluxe"...

Convection Blower for PDV/PI/CORN/PUF | Part Number: PU-4C447

$185.90

Convection (Room Air) Blower. 250 cfm. **NOTE: For all models listed on this page - including Corn/Multifuel Stoves, Pellet Utility...

Digital Control Board for Pellet (2004) | Part Number: PU-CB04

$257.21

Digital System Control Board (rear of board is pictured). For models manufactured 2004 or later (auto-start igniter models). (For models...

Glass Kit for MH,TR & All Pellet (w/Gasket) 9 1/8x9 1/8 | Part Number: AC-G9

$96.96

Door Glass Kit. Includes 9 1/8" x 9 1/8" glass, and gasket necessary to install. Shown on 25-PDVC, works on...

Block Bearing 3/4 " Bore | Part Number: PU-UCF204-12

$43.77

Auger Bearing (block bearing) for pellet units. 3/4" bore. Price listed is for one piece (two pieces are on each...

Hopper Lid Gasket | Part Number: PU-HLG

$33.38

Hopper Lid Gasket for pellet stove hopper lids. Includes self-adhesive backing for easy strip and press application.NOTE: Please enter your...

Vacuum Shut Down Switch .04-.05 | Part Number: CU-VS

$68.53

Vacuum Shut Down Switch. This is the "Door Ajar Switch." The vacuum hose from this switch connects directly to the...

Vacuum Shut Down Switch | Part Number: PU-VS

$52.19

Vacuum Shut Down Switch. The vacuum hose from this switch connects to the Exhaust Blower of the stove. Will retro-fit...

Auger Bearing Gasket, Nylon | Part Number: PU-ABGN

$18.79

Auger Bearing Gasket. For stoves built 2001 or later. New material, replaces PU-ABG. Fits on block bearing (see Part Number...

Heat Sensor For Control Board | Part Number: PU-CBHS

$31.24

Heat Sensor for Control Board (the white-covered wire shown in photo). For control boards used on all pellet stoves manufactured...

Hopper Lid Safety Switch Button Type | Part Number: AC-HLSB

$31.19

Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS.(NOTE: Also for pellet grill/smokers with PG100 in model number)Important! You...

Fuse, 6 amp, for Control Board (set of 5) | Part Number: PU-CBF6

$19.28

Fuse for Control Board. Box of 5.NOTE: Even If you have a stove that was supplied with a 5 amp,...

Wear Plate BP PDVC| Part Number: PU-BP98WP

$25.84

Wear Plate fits all 25-PDVC from 1998 through the present date also is used on 25-PDV built in 2001 or...

Bottom Auger for PDVC/SHP10 | Part Number: PU-AF11B

$54.26

Bottom Auger. For all 25-PDVC/55-SHP10/55-TRP10 units. Also for ALL pellet models 2001 and later.NOTE: For models 1992-2000, and other than...

Door Gasket Kit | AC-GGDGKC

$51.55 $54.45

• Kit
• AC-DGKC
• AC-GGK

• Includes AC-DGKC and AC-GGK
• Door Gasket Kit for models manufactured after July 1988. (Note: Also for wood insert models with JC or 20 in model number with manufacture date of 1986-1995). 3/4" round door gasket, includes silicone necessary to install. Note: Is also the Ash Pan door gasket for the add-on wood furnace (models with '35' in model number). If ordering for the main door gasket and ash pan door gasket for the add-on wood furnace, order two kits.
• Window glass gasket kit. Includes gasket (approx. 1" x 7' flat, adhesive on one side). Does not include glass. Includes self-adhesive backing for easy strip and press application. For certain stoves - Is also used as Ash Pan gasket and/or Hopper Lid gasket on some stoves, see your stove's parts diagram or owner's manual for reference. If ordering for glass gasket and ash pan gasket, for example, you should order two kits.

Digital Control System Control Board ( 1998 ) | Part Number: PU-CB98

$257.21

Digital System Control Board. For models manufactured before 2004. (For models manufactured 2004 or later, see PU-CB04.)**NOTE: Please specify your...

Auger Bearing Gasket | Part Number: PU-ABG

$18.79

Auger Bearing Gasket. For stoves built 2000 or before. Fits on block bearing (see Part Number PU-UCF204-12).

Top Auger for all Pellet Units | Part Number: PU-AF6T

$51.48

Top Auger. For all pellet units.NOTE: Does not include Locking Collar (PU-2X570) or Block Bearing (PU-UCF204-12).

Digital Wall Thermostat | Part Number: PU-DTSTAT

$75.04

• Info
• Installation

• Digital Wall Thermostat. Can be used on all of our pellet units, as well as our multi-fuel unit.
  Mercury-Free!
  Comes with proprietary instructions for installing on our units.
  NOTE: Does NOT turn pellet stove On & Off, it does increase or decrease the pellet feed rate as needed.
  EXCEPTION: For our multi-fuel model and our pellet models with "EP," "IP" or "PAH" in model number, will turn entire unit on & off as needed OR use a "High/Low" mode of operation (download your stove's owner's manual and call Tech. Support if you have questions).

• See below for video instructions regarding this part on various models. An instruction sheet will also accompany the part, and you may dial (800) 245-6489 (or visit www.heatredefined.com) with any questions.

  Stoves with EP or EPI in model number:

  Stoves with IP in model number:

  Stoves with PAH in model number:

TWO (2) Auger Bearing Gasket, Nylon | PU-ABGN2

$25.08 $37.58

• Kit
• PU-ABGN

• TWO (2) Auger Bearing Gaskets, Nylon
• Auger Bearing Gasket. For stoves built 2001 or later. New material, replaces PU-ABG. Fits on block bearing (see Part Number PU-UCF204-12).

PU-BPG and PU-CBMG Kit | PU-BPCBG

$39.45 $50.01

• Kit
• PU-BPG
• PU-CBMG

• PU-ABGN and auger motor PU-047040
• Burn Pot Flange Gasket. Fits between the burn pot and the rear of the stove. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Order Comments" box of your Shopping Cart before checking out.
• Contains the following two items: 1. Combustion Blower Gasket. Fits on Exhaust (Combustion) Blower flange, where blower meets stove. The odd-shaped gasket pictured at top left. 2. Combustion Blower Motor Gasket. Fits on Exhaust (Combustion) Blower motor, so that you can remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower. Replace the appropriate gasket each time you remove your motor (or entire blower assembly) to clean it. NOTE: Replaces former part PU-CBG and former part PU-CMG. Both are included in this kit. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Order Comments" box of your Shopping Cart before checking out.

3/4" I.D. Collar | Part Number: PU-2X570

$16.50

3/4" I.D. Auger Shaft Locking Collar for pellet stoves. Price listed is for one piece (two pieces are on each...

Hopper Lid Safety Switch Arm Lever | Part Number: AC-HLSA

$31.19

Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS.Important! You must replace with the type of switch that came...

Recessed Hopper Lid Latch ( 2002 Models or Later) | Part Number: PU-62-40-151-3

$41.00

Recessed Hopper Lid Latch. One per package.NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Order...

Wear Plate for PDV & PI for 2002 & Later Units | Part Number: PU-BP98WPA

$25.84

Wear Plate fits all 25-PDV manufactured 2002 to present. This is the plate that holds the pellets; it fits inside...

Large Spring Handle | Part Number: AC-SH

$3.64

Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this...

Black Spray Paint, ( 7001 ), ORM-D | Part Number: AC-MBSP

$32.85

High-temperature black spray paint. 12 oz. can. NOTE: By law, this item can only be shipped UPS Ground (even if...

Outside Air Kit for Pellet Units | Part Number: PU-OAK

$85.05

This kit is manufactured by England's Stove Works, and is the official OEM outside air kit for our pellet stoves....

Flexible Aluminum Intake Air Hose 2" | Part Number: PU-FAH

$36.10

Black Silicone, 3 oz. Tube | Part Number: AC-RTV3

$24.50

3 oz. tube black silicone. Tested to 425 degrees F.See below for video instructions regarding this part on various models....

Burn Pot (Firepot) for PDV & PI | Part Number: PU-BP02A

$111.55

Burn Pot (firepot) Assembly. This is a one-piece unit, which is the burn pot only (not the "feeder pot") for...

Hopper Lid Latch; Raised; Corn and Pre-02 Pellet | Part Number: PU-103-50

$31.18

Hopper Lid Latch. One per package.NOTE: As a TOP LID latch, was for pellet stoves manufactured 2001 and earlier. For...

Auger Motor Gasket Support | Part Number: PU-AMS

$18.79

Auger Motor Gasket Support Sleeve. Fits around outside air intake, Lower Auger Motor rests on it.

3/8 x 1 3/4 Hinge Pin Rivet for all Cast Doors | Part Number: AC-HP

$13.88

Hinge Pin Rivet for cast stove door; 3/8" x 1 3/4". Price shown is for one pin.

DuraVent PelletVent 45 Degree Elbow for 3" Pellet Pipe | Part Number: AC-3045

$62.49

For 3" pellet vent pipe. 45 degree elbow is ideal for corner installations (to connect cater-cornered stove to a through-the-wall...

DuraVent PelletVent 3" Pellet Vent Adapter | Part Number: PU-3079

$33.29

3" Pellet Pipe Adapter. Adapts into appliance outlet, allowing pipe to easily connect or disconnect. Can be used for horizontal...

DuraVent PelletVent 3' Section of 3" Pellet Pipe | Part Number: AC-3036

Sold Out $64.23

Three-foot (3') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...

Hopper Flange Gasket (3/8") | Part Number: PU-HFG

$23.17

Up Grade Baffle for PDV-PI 2001 or Later | Part Number: PU-5206-10

$53.32

Impingement (baffle) Plate for 25-PDV, 55-SHP22 and 55-SHP22L, 55-TRP22 or American Heritage pellet stoves (or 25-PI, 55-SHP20 or 55-TRP20 pellet...