Products

1/4" wide X 3"OD x 1" ID Rubber Gasket for Pellet Stove Auger Motor | Part Number: CU-RG

$26.80

1/4" wide X 3" Gasket (functions as a Vibration Dampener). Fits between the Auger Motor and the Auger Mounting Plate...

2 rpm Auger Motor | Part Number: CU-047042

$169.99

England's Stove Works genuine OEM replacement parts. 2.4 rpm auger ('feed') motor for pellet stoves. Works with models with 'CBEP,'...

3/8 x 1 3/4 Hinge Pin Rivet for Cast Doors | Part Number: AC-HP

$24.95

Hinge Pin Rivet for cast stove door; pin measures 3/8" x 1 3/4". See images. Price shown is for one...

Ash Pan Gasket | Part Number: AC-APG

$28.51

Gasket kit for the ash pan of the stove. Includes gasket (3/4" wide, adhesive on one side).In the Comments box,...

Ash Pan Handle | Part Number: PU-APEP

$122.69

Ash Pan for "Evolution Pellet" models.

Ash Pan Spring Latch | Part Number: PU-57-10-301-11

$41.00

Auger Coupler for Pellet Stove | Part Number: CA-AC

$32.91

Auger Coupler for pellet (and corn/multi-fuel) stove models. This is for the coupler only (arrow in image points to it),...

Auger for 25-EP/EPI/CBEP/PUF/PAH/IP - 7" OAL | Part Number: PU-AFEP

$69.09

Steel auger for some pellet stove models. Approx. 7 inches long. Auger only, no other parts included.

Auger Mounting Plate | Part Number: CA-AMPP

$64.96

Auger Mounting Plate for pellet stoves. This is the cast plate that mounts to the auger motor (the arrow is pointing...

Backplate Gasket Kit for 24-JC, 25-PI, 13-NCI | Part Number: AC-PGK

$29.49

Fireplace Cover Plate (backplate) gasket kit. **NOTE: For fireplace insert model only; not for Freestanding models.

Backplate Panel (Center Piece) | Part Number: PU-SKEPC

$65.79

Backplate Panel (Center Piece) for the Evolution Fireplace Insert (25-EPI, 55-SHPEPI 55-SHPEPIL and 55-TRPEPI)

Backplate Panel (Left) | Part Number: PU-SKEPL

$65.00

Backplate Panel (Left) for the Evolution Fireplace Insert (25-EPI, 55-SHPEPI 55-SHPEPIL and 55-TRPEPI)

Backplate Panel (Right) | Part Number: PU-SKEPR

$63.65

Backplate Panel (Right) for the Evolution Fireplace Insert (25-EPI, 55-SHPEPI 55-SHPEPIL and 55-TRPEPI)

Black Silicone, 3 oz. Tube | Part Number: AC-RTV3

$28.97

3 oz. tube black silicone. Tested to 425 degrees F.See below for video instructions regarding this part on various models....

Black Spray Paint, ORM-D | Part Number: AC-MBSP

$32.92

High-temperature black spray paint. 12 oz. can. NOTE: By law, this item can only be shipped UPS Ground (even if...

Brushed Nickel Window Trim | Part Number: AC-120-BN

$153.47

Nickel Window Trim. This is actually a 15-piece kit that will provide trim for all 3 windows; very good quality,...

Burn Pot Cradle | Part Number: PU-BPCEP

$169.99

Burn Pot Cradle for "Evolution Pellet" Stove models listed on this page. This is a one-piece unit, and is the...

Burn Pot for EP | Part Number: PU-BPEP

$119.99

Burn Pot unit for models with EP or CBEP in model number. This is a one-piece unit, and is the...

Cartridge Heater (Igniter) Sleeve for EP Models | Part Number: AC-CHSEP

$52.98

Cartridge Heater (Igniter) Sleeve for certain pellet stove models. NOTE: This is the sleeve ONLY (the sleeve that the igniter...

Cartridge Heater Assembly - Igniter and Collar | Part Number: PU-CHA

$119.99

England's Stove Works genuine OEM replacement igniter for our pellet stoves. Replaces original igniter on your stove. Cartridge Heater (igniter)...

Center Glass, 10.5" x 14.25" 5mm Glass | Part Number: AC-G40

$158.27

Door Glass. Includes 10.675" x 14.438" glass, and gasket necessary to install. Shown on 25-EP as center glass, works on models...

Ceramic Fiber Board for EP Stove | Part Number: AC-CFBEP

Sold Out $111.61

Ceramic Fiber Board for "Evolution Pellet" Stove models listed on this page.

Chimney Rx Hearth & Grill Cleaner | Part Number: RX-WSC

$49.99

England's Stove Works Hearth & Grill Cleaner is a commercial strength cleaner. It is a high alkalinity citrus detergent, containing...

Cleaning Rod for EP (bolt on) | Part Number: AC-EPCR

$59.00

Cleaning Tool for all Pellet Stoves | Part Number: AC-CT

$52.40

A great, handy cleaning tool for all pellet stoves of any make and model. Tip end is perfect for cleaning...

Complete Grill for 25-EP(I) | Part Number: AC-EPGRILL

$59.73

Complete Grill for 25-EP(I)

Convection (Room Air) Blower for Pellet Models | Part Number: PU-4C442

$199.99

Convection (Room Air) Blower for pellet stoves. Some model numbers have stipulations (below). If your model is not listed below, this...

Creosote and Woodstove Cleaner | Part Number: RX-CRKIT

$59.99

Combo Pack - Buy a bottle of Creosote Remover, Get a bottle of Stove Cleaner Free! CREOSOTE REMOVER -- Creosote...

Creosote Remover | Part Number: RX-CR

$49.99

Creosote Remover is an effective maintenance product used to help control dangerous creosote and soot deposits in all wood and...

Digital Control Board for EP (2008) | Part Number: PU-CBEP

$299.99

Digital System Control Board (rear of board is pictured). For EP or EPI ("Evolution Pellet") models listed on this page....

Door Gasket Kit for EP | Part Number: AC-DGKEP

$58.90

Door Gasket Kit for pellet models with "EP" or "EPI" in model number. 3/4" round door gasket, includes silicone necessary...

DuraVent PelletVent 1' Adjustable Section of 3" Pellet Pipe | Part Number: AC-3012A

$81.79

One-foot (1') long section of 3" pellet vent pipe. How it works: Use when a fixed length of pellet vent...

DuraVent PelletVent 1' Section of 3" Pellet Pipe | Part Number: AC-3012

$67.00

One-foot (1') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...

DuraVent PelletVent 3" Pellet Vent Adapter | Part Number: PU-3079

$59.73

3" Pellet Pipe Adapter. Adapts into appliance outlet, allowing pipe to easily connect or disconnect. Can be used for horizontal...

DuraVent PelletVent 3" Pellet Vent Kit | Part Number: AC-3000

$326.00

Through-the-wall 3" Pellet Vent Kit (mfg. by Dura-Vent). Contains all the parts needed for most pellet through-the-wall installations. NOTE: Unfortunately,...

DuraVent PelletVent 3" to 6" Increaser | Part Number: AC-3074

$102.59

AC-3074 Dura-Vent 3" to 6" increaser is for connecting to premanufactured pipe chimney only, not for connecting to masonry chimney....

DuraVent PelletVent 3' Section of 3" Pellet Pipe | Part Number: AC-3036

$83.92

Three-foot (3') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...

DuraVent PelletVent 4" High-Altitude Pellet Vent Kit | Part Number: AC-3100

$382.00

Through-the-wall 4" Pellet Vent Kit for high-altitude installations (over 4,000 ft.). This is for through-the-wall installations. NOTE: Unfortunately, product is...

DuraVent PelletVent 45 Degree Elbow for 3" Pellet Pipe | Part Number: AC-3045

$80.93

For 3" pellet vent pipe. 45 degree elbow is ideal for corner installations (to connect cater-cornered stove to a through-the-wall...

DuraVent PelletVent 90 Degree Elbow for 3" Pellet | Part Number: AC-3090

$87.08

For 3" pellet vent pipe. 90 degree elbow is ideal for when you need an extra elbow in your installation....

DuraVent PelletVent Clean-Out Tee for 3" Pellet | Part Number: AC-3067

$117.93

Tee with Cleanout Adapter. 3" diameter pellet pipe. Convenient twist-lock connection. Creates 90 degree offset with clean-out access; easy access...

DuraVent PelletVent Horizontal Cap for 3" Pellet | Part Number: AC-3085

$79.83

Dura-Vent Horizontal Cap for 3" pellet vent pipe NOTE: Unfortunately, product is not available for Canada.

DuraVent PelletVent Wall Strap for 3" Pellet Vent Kit | Part Number: AC-3069

$62.80