1 R.P.M. Auger Motor for Pellet Units. England's Stove Works genuine 1 RPM replacement auger for our stoves. NOTE: Also...View full product details
Cartridge Heater (igniter) element for Auto-Start pellet units (Auto-Start units have manufacture date of 2004 or later). Comes with locking...View full product details
Combustion (Exhaust) Blower. Negative draft. England's Stove Works genuine replacement Exhaust (Combustion) Blower for our pellet stoves. Includes gasket necessary...View full product details
England's Stove Works genuine replacement gasket for our Exhaust (Combustion) Blower. Contains the following two items:1. Combustion Blower Gasket. Fits...View full product details
Window glass gasket kit. Includes gasket (approx. 1" x 7' flat, adhesive on one side). Does not include glass. Includes...View full product details
Burn Pot Flange Gasket. Fits between the burn pot and the rear of the stove. NOTE: Please enter your stove's...View full product details
England's Stove Works genuine replacement door gasket for our stoves. Door Gasket Kit for models manufactured after July 1988. (Note:...View full product details
Vacuum Hose Kit for vacuum shut-down switch. Contains one (1) five-foot length of hose that can be cut to fit...View full product details
Digital System Control Board (rear of board is pictured). For models manufactured 2004 or later (auto-start igniter models). (For models...View full product details
IMPORTANT: For all pellet models listed on this page except 2002 and newer "Deluxe" freestanding and insert pellet models ("Deluxe"...View full product details
Door Glass Kit. Includes 9 1/8" x 9 1/8" glass, and gasket necessary to install. Shown on 25-PDVC, works on...View full product details
Vacuum Shut Down Switch. This is the "Door Ajar Switch." The vacuum hose from this switch connects directly to the...View full product details
Vacuum Shut Down Switch. The vacuum hose from this switch connects to the Exhaust Blower of the stove. Will retro-fit...View full product details
Auger Bearing (block bearing) for pellet units. 3/4" bore. Price listed is for one piece (two pieces are on each...View full product details
Hopper Lid Gasket for pellet stove hopper lids. Includes self-adhesive backing for easy strip and press application.NOTE: Please enter your...View full product details
Heat Sensor for Control Board (the white-covered wire shown in photo). For control boards used on pellet stoves manufactured 1998...View full product details
Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS.(NOTE: Also for pellet grill/smokers with PG100 in model number)Important! You...View full product details
Auger Bearing Gasket. For stoves built 2002 or later. New (harder) material, replaces PU-ABG. Fits on block bearing (see Part...View full product details
Fuse for Control Board. Box of 5.NOTE: Even If you have a stove that was supplied with a 5 amp,...View full product details
Includes AC-DGKC Door Gasket Kit and AC-GGK Window Glass Gasket Kit. For all stoves listed on this page. Remember to...View full product details
Wear Plate fits all 25-PDVC from 1998 through the present date also is used on 25-PDV built in 2001 or...View full product details
Bottom Auger. For all 25-PDVC/55-SHP10/55-TRP10 units. Also for ALL pellet models 2001 and later.NOTE: For models 1992-2000, and other than...View full product details
Digital System Control Board. For models manufactured before 2004. (For models manufactured 2004 or later, see PU-CB04.)**NOTE: Please specify your...View full product details
Impingement (baffle) Plate(s) for 25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10 or American Standard pellet stoves.Plate(s) may or may not be exactly like...View full product details
Top Auger. For all pellet units.NOTE: Does not include Locking Collar (PU-2X570) or Block Bearing (PU-UCF204-12).View full product details
PU-BPG burn pot gasket and PU-CBMG combustion blower and motor gasketView full product details
Digital Wall Thermostat. Can be used on all of our pellet units, as well as our multi-fuel unit.
Comes with proprietary instructions for installing on our units.
NOTE: Does NOT turn pellet stove On & Off, it does increase or decrease the pellet feed rate as needed.
EXCEPTION: For our multi-fuel model and our pellet models with "EP," "IP" or "PAH" in model number, will turn entire unit on & off as needed OR use a "High/Low" mode of operation (download your stove's owner's manual and call Tech. Support if you have questions).
3/4" I.D. Auger Shaft Locking Collar for pellet stoves. Price listed is for one piece (two pieces are on each...View full product details
Auger Bearing Gasket. For stoves built 2001 or before. Fits on block bearing (see Part Number PU-UCF204-12). Fiberglass (soft) material....View full product details
For use on freestanding wood or pellet stoves (including EPA certified stoves) with a surface temperature between 185°F – 660°F...View full product details
Hopper Lid Safety Switch. Sometimes listed as AC-HLS or PU-HLS.Important! You must replace with the type of switch that came...View full product details
Burn Pot (firepot) Assembly. This is a one-piece unit, which is the burn pot only (not the entire "feeder system")...View full product details
Recessed Hopper Lid Latch. One per package.NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Order...View full product details
Through-the-wall 3" Pellet Vent Kit (mfg. by Dura-Vent). Contains all the parts needed for most pellet installations. NOTE: Unfortunately, product...View full product details
This kit is manufactured by England's Stove Works, and is the official OEM outside air kit for our pellet stoves....View full product details
3 oz. tube black silicone. Tested to 425 degrees F.See below for video instructions regarding this part on various models....View full product details
High-temperature black spray paint. 12 oz. can. NOTE: By law, this item can only be shipped UPS Ground (even if...View full product details
PU-ABG (soft, fiberglass) gasket and 1 RPM auger motor PU-047040View full product details
(1) PU-ABGN auger bearing gasket and (1) 1-RPM auger motor PU-047040View full product details
Hopper Lid Latch. One per package.NOTE: As a TOP LID latch, was for pellet stoves manufactured 2001 and earlier. For...View full product details
Hinge Pin Rivet for cast stove door; 3/8" x 1 3/4". Price shown is for one pin.View full product details
Auger Motor Gasket Support Sleeve. Fits around outside air intake, Lower Auger Motor rests on it.View full product details
3" Pellet Pipe Adapter. Adapts into appliance outlet, allowing pipe to easily connect or disconnect. Can be used for horizontal...View full product details
Three-foot (3') long section of 3" pellet vent pipe; uses the "twist lock" connection. Gives 3" clearance to combustibles, and...View full product details
Wiring Harness for pellet units. Please be sure to list your model number and date of manufacture at check-out where...View full product details
Stay in touch with us!
You may be aware of our 40+year tradition of providing excellent wood stoves, pellet stoves, pellet grills (and now – fire pits and lifestyle products), or you may simply be interested in learning more about us.
Either way, we’d love to keep in touch
England's Stove Works, Inc.
589 S Five Forks Rd
Monroe, VA 24574
Terms and Conditions
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS OF USE CAREFULLY BEFORE USING THIS WEBSITE. All users of this site agree that access to and use of this site are subject to the following terms and conditions and other applicable law. If you do not agree to these terms and conditions, please do not use this site.
The entire content included in this site, including but not limited to text, graphics or code is copyrighted as a collective work under the United States and other copyright laws, and is the property of England's Stove Works, Inc.. The collective work includes works that are licensed to England's Stove Works, Inc. Copyright 2018, England's Stove Works, Inc. ALL RIGHTS RESERVED. Permission is granted to electronically copy and print hard copy portions of this site for the sole purpose of placing an order with England's Stove Works, Inc. or purchasing England's Stove Works, Inc. products. You may display and, subject to any expressly stated restrictions or limitations relating to specific material, download or print portions of the material from the different areas of the site solely for your own non-commercial use, or to place an order with England's Stove Works, Inc. or to purchase England's Stove Works, Inc. products. Any other use, including but not limited to the reproduction, distribution, display or transmission of the content of this site is strictly prohibited, unless authorized by England's Stove Works, Inc. You further agree not to change or delete any proprietary notices from materials downloaded from the site.
All trademarks, service marks and trade names of England's Stove Works, Inc. used in the site are trademarks or registered trademarks of England's Stove Works, Inc.
Stoves, Grills, Accessories, Parts and Other Products: Please see your product's Owner's Manual for the Warranty Statement for that particular product.
For the web site, including downloads, etc.: This site and the materials and products on this site are provided "as is" and without warranties of any kind, whether express or implied. To the fullest extent permissible pursuant to applicable law, England's Stove Works, Inc. disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose and non-infringement. England's Stove Works, Inc. does not represent or warrant that the functions contained in the site will be uninterrupted or error-free, that the defects will be corrected, or that this site or the server that makes the site available are free of viruses or other harmful components. England's Stove Works, Inc. does not make any warrantees or representations regarding the use of the materials in this site in terms of their correctness, accuracy, adequacy, usefulness, timeliness, reliability or otherwise. Some states do not permit limitations or exclusions on warranties, so the above limitations may not apply to you.
Limitation of Liability
England's Stove Works, Inc. shall not be liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products, even if England's Stove Works, Inc. has been advised of the possibility of such damages. Applicable law may not allow the limitation of exclusion of liability or incidental or consequential damages, so the above limitation or exclusion may not apply to you.
In the event that a England's Stove Works, Inc. product is mistakenly listed at an incorrect price, England's Stove Works, Inc. reserves the right to refuse or cancel any orders placed for product listed at the incorrect price. England's Stove Works, Inc. reserves the right to refuse or cancel any such orders whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is cancelled, England's Stove Works, Inc. shall issue a credit to your credit card account in the amount of the incorrect price.
These terms and conditions are applicable to you upon your accessing the site and/or completing the registration or shopping process. These terms and conditions, or any part of them, may be terminated by England's Stove Works, Inc. without notice at any time, for any reason. The provisions relating to Copyrights, Trademark, Disclaimer, Limitation of Liability, Indemnification and Miscellaneous, shall survive any termination.
England's Stove Works, Inc. may deliver notice to you by means of e-mail, a general notice on the site, or by other reliable method to the address you have provided to England's Stove Works, Inc..
Your use of this site shall be governed in all respects by the laws of the state of Virginia, U.S.A., without regard to choice of law provisions, and not by the 1980 U.N. Convention on contracts for the international sale of goods. You agree that jurisdiction over and venue in any legal proceeding directly or indirectly arising out of or relating to this site (including but not limited to the purchase of England's Stove Works, Inc. products) shall be in the state or federal courts located in Amherst County, Virginia. Any cause of action or claim you may have with respect to the site (including but not limited to the purchase of England's Stove Works, Inc. products) must be commenced within one (1) year after the claim or cause of action arises. England's Stove Works, Inc.'s failure to insist upon or enforce strict performance of any provision of these terms and conditions shall not be construed as a waiver of any provision or right. Neither the course of conduct between the parties nor trade practice shall act to modify any of these terms and conditions. England's Stove Works, Inc. may assign its rights and duties under this Agreement to any party at any time without notice to you.
Use of Site
Harassment in any manner or form on the site, including via e-mail, chat, or by use of obscene or abusive language, is strictly forbidden. Impersonation of others, including a England's Stove Works, Inc. or other licensed employee, host, or representative, as well as other members or visitors on the site is prohibited. You may not upload to, distribute, or otherwise publish through the site any content which is libelous, defamatory, obscene, threatening, invasive of privacy or publicity rights, abusive, illegal, or otherwise objectionable which may constitute or encourage a criminal offense, violate the rights of any party or which may otherwise give rise to liability or violate any law. You may not upload commercial content on the site or use the site to solicit others to join or become members of any other commercial online service or other organization.
England's Stove Works, Inc. does not and cannot review all communications and materials posted to or created by users accessing the site, and is not in any manner responsible for the content of these communications and materials. You acknowledge that by providing you with the ability to view and distribute user-generated content on the site, England's Stove Works, Inc. is merely acting as a passive conduit for such distribution and is not undertaking any obligation or liability relating to any contents or activities on the site. However, England's Stove Works, Inc. reserves the right to block or remove communications or materials that it determines to be (a) abusive, defamatory, or obscene, (b) fraudulent, deceptive, or misleading, (c) in violation of a copyright, trademark or; other intellectual property right of another or (d) offensive or otherwise unacceptable to England's Stove Works, Inc. in its sole discretion.
You agree to indemnify, defend, and hold harmless England's Stove Works, Inc., its officers, directors, employees, agents, licensors and suppliers (collectively the "Service Providers") from and against all losses, expenses, damages and costs, including reasonable attorneys' fees, resulting from any violation of these terms and conditions or any activity related to your account (including negligent or wrongful conduct) by you or any other person accessing the site using your Internet account.
In an attempt to provide increased value to our visitors, England's Stove Works, Inc. may link to sites operated by third parties. However, even if the third party is affiliated with England's Stove Works, Inc., England's Stove Works, Inc. has no control over these linked sites, all of which have separate privacy and data collection practices, independent of England's Stove Works, Inc.. These linked sites are only for your convenience and therefore you access them at your own risk. Nonetheless, England's Stove Works, Inc. seeks to protect the integrity of its web site and the links placed upon it and therefore requests any feedback on not only its own site, but for sites it links to as well (including if a specific link does not work).